| Customization: | Available |
|---|---|
| After-sales Service: | After-Sales Service Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Parameters for All Models
| Constant Temp. Oven l Standard type | |||||
| Model | ADV100 | ADV150 | ADV250 | ADV500 | |
| Method | Forced convection and ventilation | ||||
| Performance | Operating temp. range | RT+10~250ºC | RT+10~200ºC | ||
| Temp. adjustment accuracy | ±0.5ºC | ±0.5ºC | |||
| Temp. distribution accuracy | ±2.5ºC | ±2.5ºC | |||
| Max. temp. reaching time | Approx. 70min (to 250ºC) | Approx.70min (to 200ºC) | |||
| Structure | Interior | Stainless steel plate | |||
| Exterior | Cold rolled steel plate with chemical proofing coating | ||||
| Insulating material | Aluminum silicate fibres | Aluminum silicate fibres | |||
| Heater | Stainless steel pipe heater with fin | ||||
| 1.2KW | 1.5KW | 3KW | 4KW | ||
| Blow fan / motor | Centrifugal blade, 25W | Centrifugal blade, 25W | Centrifugal blade, 40W | Centrifugal blade, 40W*2 | |
| Cable hole | I.D. 30mm (the back) | ||||
| Exhaust port | I.D. 30mm | ||||
| Controller | Temp. control | PID | |||
| Temp. setting | Use specialized function menu key and up/down key to set | ||||
| Temp. display | 4-digit LED digital display | ||||
| Timer | 1min-99 hr 59 min | ||||
| Operation function | Fixed temp., program operation | ||||
| Program mode | Program operation 2 segments 30 steps | ||||
| Additional function | Deviation correction, key lock | ||||
| Heater circuit control | SSR driving | ||||
| Sensor | K thermocouple (temp. controller and overheat protector) | ||||
| Safety device | Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), over_x005f heat protector, EBL to prevent overcurrent, key lock, etc. |
||||
| Specifications | Internal dimensions (W×D×Hmm) | 400*400*500 | 600*500*500 | 600*500*1000 | 800*700*900 |
| dimensions (W×D×Hmm) | 510*550*870 | 710*650*870 | 710*650*1610 | 1140*920*1680 | |
| Internal capacity | 80L | 150L | 300L | 500L | |
| Shelf plate with standard load | 30kg/piece | ||||
| Shelf plate steps/shelf rest pitch | 13steps /30mm | 13steps /30mm | 29 steps /30mm | 25 steps /30mm | |
| Power source (50/60Hz) rated current | 1 phase AC220V 6A | 1 phase AC220V 7.5A | 1 phase AC220V 15A | 1 phase AC220V 20A | |
| Weight | Approx. 60kg | Approx. 75kg | Approx. 120kg | Approx. 180kg | |
| Accesso ries | Shelf plate | Stainless steel wire mesh | |||
| 2 pcs. | |||||
| Shelf rest | 4 pcs. | ||||
| Optional | Shelf plate (1 plate with 2 rests), cable hole (30/50mm), recorder,alarm indicator lamp (stand by/running/malfunction), observation window, external communication (RS485), temp. output terminal (4~20mA),Output terminal for external alarm, time up output terminal | ||||
| Forced Convection Constant Temp.Oven l Front and rear doors | |
| Product | Oven |
| Temp. range | RT+20ºC~180ºC |
| Temp. distribution accuracy | ±5.0ºC(at 180ºC) |
| Temp. rising time | 100min(RT→180ºC) |
| Operation function | fixed temp., auto stop operations |
| Configuration | Independent overheat protector, electromagnetic lock, etc. |
| Internal dimension | W1000×D1850×H2150mm |
| Power source | Single phase AC220V |
| Forced Convection Constant Temp.Oven l Combination type | |
| Product | Constant Temperature Oven |
| Method | Forced convection |
| Operating temp. range | RT+10~260ºC |
| Temp. adjustment accuracy | ±1ºC(at210ºC) |
| Temp. distribution accuracy | ±2.5ºC(at210ºC) |
| Operation function | Fixed temp., program |
| Additional function | Deviation correction, key lock, power outage compensation |
| Internal dimension | W700×D500×H500mm (single) |
| Power source | Single phase AC220V |
Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.
Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."
ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.
ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
Secondly, our after-sales department will periodically follow up customers.
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base.
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.
){kind=link}