High Precision 1600L Temperature and Humidity Chamber for Aerospace

Product Details
Customization: Available
After-sales Service: After-Sales Service Available
Power Supply: 380V ± 10%/50Hz ±1(3p+N+G)
Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
5
Year of Establishment
2020-08-11
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
  • High Precision 1600L Temperature and Humidity Chamber for Aerospace
Find Similar Products
  • Overview
  • Product Description
  • Product Parameters
  • Company Profile
  • Workshop
  • Cooperation Cases
  • Other Products
  • Certifications
  • FAQ
Overview

Basic Info.

Model NO.
CH1600(TC)
Warranty
1 Year
Temperature Fluctuation
±0.5°c
Temperature Deviation
±2°c
Temperature Uniformity
2ºC
Heating Rate(Average Value)
2.5ºC/Min
Cooling Rate(Average Value)
1.8ºC/Min
Transport Package
Wooden Package
Specification
2100*1250*2000 (D*W*H) mm
Trademark
ATEC
Origin
China
HS Code
8479899990

Product Description

Product Description

Safety & Protections
Power supply undervoltage, over-voltage, missing phase, phase sequence error protection; 3 kinds of overtemperature protection Heater short circuit protection; Compressor overpressure / overload protection; Humidifier fault protection; Blower Motor overload / overheat protection; Panel over-current protection, earth leakage protection.


Application
CH series high-low temperature(humidity) chambers are widely used in aviation, aerospace, electronics, shipbuilding, instrumentation and other industries to do accelerated damp heat test, alternating damp heat test and fixed-value damp heat test for electrical and electronic products, materials, components, equipment. It can also be used to do high-low temperature test in order to evaluate the performance of the test samples under the given environmental conditions.

Options
Logger, Special cable port, special shelf, water cooling etc.

Material
Exterior: Spay steel(1.5mm), white(with little gray) body, blue door.
Interior: SUS304 stainless steel(1.2mm), fully welded seam, vapor impermeable.
Heat insulation: Double insulation, thickness 125mm (Polyurethane foam board, without asbestos mineral fibers)
 
Product Parameters
Parameters for all models
High-Low Temperature(humidity)Chamber
Madel Number CH100(TC) CH160(TC) CH250(TC) CH340(TC) CH600(TC) CH1000(TC) CH1600(TC) CH2000(TC)
Interior capacity(L) 100L 160L 250L 340L 600L 1000L 1600L 2000L
Performance Temperature Range C:-70C-+150ºC(CH100ºC-60ºC~+150C);Empty:-40ºC ~ +150ºC;T:Only temperature,Empty:temperature and humidity
Temperature Fluctuation ±0.5ºC
Temperature Deviation ±2ºC
Temperature Uniformity 2ºC
Humidity Deviation -3~+2%R.H.(>75%R.H.),±5%R.H.(≤75%R.H.)
Heating Rate(average value) 2ºC/min 3ºC/min 2.5ºC/min 2.5ºC/min
Cooling Rate(average value 1.5ºC/min 2ºC/min 1.8ºC/min 1.5ºC/min
Remark Above measured at ambient 20±2ºC,no load,heating/cooling rate moasured within+80/-30C and +85/-55ºC
Interior Size
(mm)
D 400 500 535 700 750 1000 1000 1100
W 500 560 600 650 850 1000 1000 1000
H 500 600 750 750 900 1000 1600 1800
Exterior Size
(mm)
D 1250 1100 1510 1680 1750 2000 2100 2300
W 750 810 850 900 1100 1250 1250 1250
H 1650 1760 1580 1650 1880 1980 2000 2200
Casters 4 casters(exterior size above not include casters,casters increased 50-100mm)
Inspection window 450×450 with heating device to prevent condensation and frost
Cable Port  φ80×1,on the right side of chamber(facing door)
Stainless Steel Shelf(2pcs) Load bearing 20kg/each Load bearing35kg/each
Internal Lighting 35W/12V 2*35W/12V
Sub-Controller Energy saving method Independent PID regulation of cooling and heating(i.e.heating no refrigeration,refrigeration no heating,saving 30% than BTC)
Heating Electrical heating(3 kinds of overtemperature protection)
Humidification  Steam humidification(water consumption 0-500ml/day)
Refrigerating Imported brand compressor (TECUMSEH/COPELAND/BITZER)
Refrigerant Environmentally friendly refrigerants R404A:CH100/CH160/CH250/CH340/CH600/CH1000 R404A+R23:other
Condenser Air-cooled(water-cooled optional,water temperature range:10~30ºC,pressure range:0.2 ~0.5Mpa)
Controller Controller 7'Color touch screen,resolution:800x480,on the top of window
Control Mode Program and fixed value
Program capacity 100×200,cycle,skip,maintain,link
Sensor PT100
Communication RS485 or LAN interface,USB interface as standard configuration,with host software
Curve function auto recorded by touch screen
Power supply 380V±10%/50HZ±1(3P+N+G)
Rated current(A)(-/-C) 12/15 13/16 15/20 15/20 22/28 25/32 26/35 29/38
Installed power(kw)(-/-C) 4.8/5.5 5.2/7 6.3/8.5 6.3/8.5 10/13 13/17 15/19 16/20
Weight (kg)w(-/-C) 210/250 280/330 330/380 400/450 620/680 900/960 1300/1400 1600/1700
Company Profile

High Precision 1600L Temperature and Humidity Chamber for Aerospace

Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.

Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."

ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.

ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
High Precision 1600L Temperature and Humidity Chamber for Aerospace

Workshop

High Precision 1600L Temperature and Humidity Chamber for Aerospace

Cooperation Cases

High Precision 1600L Temperature and Humidity Chamber for Aerospace

Other Products

High Precision 1600L Temperature and Humidity Chamber for Aerospace

High Precision 1600L Temperature and Humidity Chamber for Aerospace
Certifications

High Precision 1600L Temperature and Humidity Chamber for Aerospace

High Precision 1600L Temperature and Humidity Chamber for AerospaceHigh Precision 1600L Temperature and Humidity Chamber for Aerospace
FAQ

1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
 
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
 
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
 Secondly, our after-sales department will periodically follow up customers.
 
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
 
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base. 
 
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier