| After-sales Service: | 1 Year |
|---|---|
| Power Supply: | 380V |
| Certification: | CE, ISO |
| 1 Product name | HAST Oven | |||||||||||||||||||||||||||||||||||||||
| Product model 2 | AHT-63 | |||||||||||||||||||||||||||||||||||||||
| 3 Use of the product | With suitable for IC packaging, semiconductor, microelectronics chips, magnetic materials and other electronic parts for high pressure, high temperature, unsaturated/saturated wet heat, such as accelerated life reliability test, used in the product design stage, for rapid exposure of product defects and weak links, testing the sealing and aging performance of its products. | |||||||||||||||||||||||||||||||||||||||
| 4. Sample limitation | test or storage of samples of flammable, explosive and volatile substances; Testing or storage of corrosive substance samples; Testing or storage of biological samples; Testing or storage of samples of strong electromagnetic emission sources; |
|||||||||||||||||||||||||||||||||||||||
| 5. Way | ||||||||||||||||||||||||||||||||||||||||
| 5.1 Heating Method 5.2 Humidification method 5.3 Pressure Method 5.4 Circulation Mode 5.5 Pressure relief and cooling methods 5.6 Run the control mode |
Stainless steel armored electric heating tube; Electric heating steam humidification; Saturated and unsaturated steam compression; Low wind speed magnetic sealed drive circulating motor fan;
|
|||||||||||||||||||||||||||||||||||||||
| 6. Volume and size | ||||||||||||||||||||||||||||||||||||||||
| 6.1 Content Volume 6.2 Interior Dimensions 6.2 External Dimensions |
63L Phi 400 * D500mm W1000×D1300×H1500mm (except body protrusions, subject to final design) |
|||||||||||||||||||||||||||||||||||||||
| 7. Performance | ||||||||||||||||||||||||||||||||||||||||
| 7.1 Meet design specifications 7.2 Temperature Range 7.3 Humidity Range 7.4 Pressure Range 7.5 Performance Control 7.6 Power Supply/Total Installed Power |
1.GB/T 2423.40-2013 Environmental tests - Part 2: Test methods Test Cx: unsaturated high pressure steam constant humid heat; 2.JESD22-A102E-2015 Accelerated moisture resist; 3.GB/T 4937.4-2012 semiconductor devices -- Mechanical and climatic test methods -- Part 4: Strong accelerated steady-state moisture heat test; 4. Others: IEC60068-2-66,JESD22-A110-D,JESD22-A118-A; 105 ~ 143ºC; 75% to 100%RH; 0.02MPa to 0.39MPa; 1. Unsaturated steam control mode: humidity can be set, temperature can be set, temperature and humidity, pressure can be displayed;
2. Saturated steam control mode: temperature can be set, temperature and humidity, pressure can be displayed;
3. Dry and wet bulb temperature control mode: humidity can be set, temperature can be set, temperature and humidity can be displayed;
AC220V/50Hz 5KW |
|||||||||||||||||||||||||||||||||||||||
| 8. Structural features | ||||||||||||||||||||||||||||||||||||||||
| 8.1 Structural form 8.2 Exterior materials 8.3 Inner slot material 8.4 Heat breaking material 8.5 Temperature Heater 8.6 Humidity Heater 8.7 Circulating Fan 8.8 Bias terminal group 8.9 Maximized workspace 8.10 Prevent condensation and specimen wetting 8.11 Automatic locking mechanism 8.12 Automatic Water Refill 8.13 Prevent sample drying 8.14 Shelf for experiment |
Integral structure, the single groove double-layer cylinder cycle, temperature, humidity control and steam pressure control, sealing strip with food grade silicone overall pressing, easy to clean and maintain the mechanism; The shell is made of Q235 cold rolled steel plate, the surface is treated with gray spray, RAL9003 signal white; The inner groove is made of high pressure resistant SUS316 stainless steel, mirror surface treatment, in line with the relevant national pressure vessel standards; Ultrafine high quality glass fiber cotton, to ensure that the equipment at the highest temperature, high flame retardant; Professional temperature heater, using SUS316 stainless steel material; Waterproof humidity heater, SUS316 stainless steel; Low wind speed magnetic shaftless central drive circulating motor fan, air circulating fan to minimize temperature and humidity changes in the test area, in order to obtain higher accuracy during the test, the fan enables uniform stress to be applied to the sample; Meet the test of 6 groups of 12 leads, with 12 power pins per sample signal terminal as the standard, additional pins can be extended; Cylindrical pressure vessel evenly distributes pressure with superior strength, internally extended for easier loading of a large sample such as a printed circuit board, etc; Double cylinder construction and proprietary air conditioning system prevent dew condensation and water dripping on the sample compared to the natural convection test system, temperature control and operation of the fan in the test area before and after the test also prevent dew condensation and droplet formation on the sample, ensuring highly readable test results, (with wet and dry bulb temperature control and unsaturated control); Door lock security mechanism to prevent the opening of the door when the groove is pressurized; Humidification water is automatically filled from the built-in water supply tank at the beginning of the test, the water level in the tank can be checked externally through a gap in the front cover, and the tank capacity is greater than 10L; Gradual decompression and air/water drainage mechanisms eliminate sudden changes in pressure and temperature after the test is completed, thus ensuring that the water contained in the sample does not evaporate. This provides more accurate test results that are relevant to the site. Stainless steel movable shelf one piece, bearing 30Kg; |
|||||||||||||||||||||||||||||||||||||||
| 9. Control system | ||||||||||||||||||||||||||||||||||||||||
| 9.1 Controller 9.2 Temperature Sensor 9.3 Pressure Gauge 9.4 Cable |
7 inch color programmable touch screen, equipped with ATEC temperature and humidity control operating system, Chinese graphic temperature, humidity and wet bulb temperature control and display, large program capacity, many cycles, with USB curve data download function, perfect communication interface; Temperature sensor (PT100 platinum resistance, used to measure the room temperature, humidifying water temperature, wet bulb temperature), heater, overheat protector, boiling dry protector; Stainless steel Bourdon tube pressure gauge; Not more than 3m; |
|||||||||||||||||||||||||||||||||||||||
| 10. Safety devices | ||||||||||||||||||||||||||||||||||||||||
| 10.1 Independent overtemperature protection 10.2 Independent pressure protection 10.2 Leakage protection switch 10.3 Safety protection measures 10.4 Emergency stop switch |
Independent overtemperature controller; Independent pressure switch, automatic pressure relief over pressure; With leakage, short circuit, overcurrent protection of the circuit breaker start, effectively protect all electrical components; 1. The whole equipment is equipped with fan motor current overload protection; 2. Heater empty burning, over current, short circuit protection; 3. Automatic vacuum breaking, automatic pressure relief and drainage; 4. Safe grounding protection; 1 emergency button; |
|||||||||||||||||||||||||||||||||||||||
| 11 accessories | ||||||||||||||||||||||||||||||||||||||||
| 11.1 Random Materials 11.2 Shelf |
Equipment operation manual, certificate of qualification, operation manual of main purchased parts; 1 piece of movable shelf; |
|||||||||||||||||||||||||||||||||||||||
| 12 for shipping | ||||||||||||||||||||||||||||||||||||||||
| 12.1 Methods 12.2 Packaging Materials |
Integral, integral transportation; Packing in wooden cases; |
|||||||||||||||||||||||||||||||||||||||
| 13. Conditions of use | ||||||||||||||||||||||||||||||||||||||||
| 13.1 Venue 13.2 Environmental Conditions 13.3 Power Supply |
Ground level and well ventilated; No strong vibration around the equipment; No strong electromagnetic field around the equipment; No flammable, explosive, corrosive substances and dust around the equipment; Ground bearing capacity: not less than 800kg/m Leave proper space for use and maintenance around the equipment; Temperature: 0ºC ~ 40ºC; Relative humidity: ≤85%; Air pressure: 86kPa ~ 106kPa; AC220V±10% 50Hz±1% (with protective ground wire), 8KW; |
|||||||||||||||||||||||||||||||||||||||
| 14. After-sales service | ||||||||||||||||||||||||||||||||||||||||
| 14.1 Installation service 14.2 Training 14.3 Warranty period 14.4 Out of warranty period 14.5 Timeliness of service |
ATEC Company is responsible for the installation and commissioning of the machine after the buyer has prepared the external conditions required for the machine (water, electricity, gas, etc.). ATEC provides the Buyer with the on-site training service, to ensure that the trainees can operate the machine independently and skillfully, complete the simple repair, routine maintenance and other work. ATEC company shall be responsible for free repair of faults caused by manufacturing reasons within 12 months from the date of acceptance, but not including machine damage caused by human reasons. Technical support will be provided throughout life, and replacement parts will be charged at cost. And provide annual irregular user return visit, telephone return visit or other forms of technical support. ATEC has an office in Shanghai and can supply various parts quickly. The seller guarantees to respond within 12 hours and troubleshoot within five working days after receiving the buyer's notice of the fault. |
|||||||||||||||||||||||||||||||||||||||
