| Customization: | Available |
|---|---|
| After-sales Service: | After-Sales Service Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Vacuum Drying Oven l Large capacity AVO500/AVO1000 | |||
| Model | AVO500 | AVO1000 | |
| Method | Decompression•chamber wall heating | ||
| Performance | Operating temp. range | 40~200ºC | |
| Operating pressure range | 101~0.1kPa(760~1Torr) | ||
| Temp. adjustment accuracy | ±1ºC(at200ºC) | ||
| Structure | Interior | Stainless steel plate | |
| Exterior | Cold rolled steel plate with chemical proofing coating | ||
| Insulating material | Glass fibre | ||
| Heater method | Decompressed chamber wall direct heating | ||
| Heater power | 6.5KW | 14.4KW | |
| Observation window | Toughened glass + resin protection panel | ||
| Vacuum gauge | Pointer type, -100~0KPa | ||
| Vacuum pump installation room | Yes | ||
| Controller | Temp. control | 3 segments PID | |
| Temp. setting | Use specialized function menu key and up/down key to set | ||
| Temp. display | Measured temp. display: green 4-digit LED digital display | ||
| Setting temp. display: red 4-digit LED digital display | |||
| Timer | 1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function) | ||
| Operation function | Fixed temp. auto start, auto stop, program operation | ||
| Program mode | Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3) | ||
| Additional function | Deviation correction, key lock, power outage compensation | ||
| Heater circuit control | SSR driving | ||
| Sensor | K thermocouple (temp. controller and overheat protector) | ||
| Safety device | Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), over_x005f heat protector, EBL to prevent overcurrent, key lock, etc. | ||
| Specifications | Internal dimensions (W×D×Hmm) | 800*800*800 | 1000*1000*1000 |
| External dimensions (W×D×Hmm) | 1020*1020*1850 | 1300*1280*2110 | |
| Internal capacity | 512L | 1000L | |
| Air exhaust port | NW40 flange | ||
| Air suction port | Rc3/8 | ||
| Power source (50/60Hz) rated current | AC220V 31.5A | 3 phase AC380V 27A | |
| Weight | Approx. 450kg | Approx. 1000kg | |
| Accessories | Stainless steel punching plates, 2 pcs. | Stainless steel punching plates, 4 pcs. | |
| Optional | Shelf plate, vacuum pump, N2 introduction device, recorder, alarm indicator lamp (stand-by/running/malfunction), external communication (RS485), temp. output terminal (4~20mA), Output terminal for external alarm, time up output terminal | ||
| Vacuum Drying Oven l Fast temp. rising and cooling | |
| Product | Vacuum Drying Oven |
| Method | Decompression • chamber wall and shelf plate heating |
| Operating temp. range | RT+30~250ºC |
| Operating vacuum range | 101~0.1KPa |
| Temp. rising time | Approx. 75min (RT→185ºC) |
| Temp. cooling time | Approx. 90min (185→50ºC) |
| Temp. adjustment accuracy | ±1ºC(at185ºC) |
| Temp. distribution accuracy | ±10ºC(at 185ºC) |
| Internal dimension | W600×D600×H600mm (single chamber) |
| Power source | 3 phase AC380V |
| Vacuum Drying Oven l Far-infrared heating, fast temp. rising and cooling | |
| Method | Decompression • far-infrared tube heating |
| Operating temp. range | RT+10~200ºC |
| Operating vacuum range | 101~1Pa |
| Temp. rising time | Approx. 90min (RT→185ºC) |
| Temp. cooling time | Approx. 90min (185→50ºC) |
| Temp. adjustment accuracy | ±1ºC(at185ºC) |
| Temp. distribution accuracy | ±5ºC(at 185ºC) |
| Internal dimension | W700×D1250×H700mm (single chamber) |
| Power source | 3 phase AC380V |
| Vacuum Drying Oven l 2-chamber, temperature & vacuum auto control | |
| Product | Vacuum Drying Oven, C2-003 |
| Method | Decompression • chamber wall heating |
| Operating temp. range | 40~200ºC |
| Operating vacuum range | 101~0.1Pa |
| Max. temp. reaching time | Approx. 120min (RT→200ºC) |
| Temp. adjustment accuracy | ±1ºC(at 200ºC) |
| Internal dimension | W450×D450×H450mm (single chamber) |
| W600×D600×H600mm (single chamber) | |
| Power source | Single phase AC220V |
| Vacuum Drying Oven l Temp. range 200ºC/300ºC/400ºC, full-automatic program control | |||
| Product | Vacuum Drying Oven, C2-004 | ||
| Method | Decompression • chamber wall heating | Decompression • internal heating | |
| Operating temp. range | 40~200ºC | 40~300ºC | 40~400ºC |
| Operating vacuum range | 101~0.1KPa | ||
| Temp. rising time | Approx. 80min (RT→200ºC) |
Approx. 120min (RT→300ºC) |
Approx. 60min (RT→400ºC) |
| Temp. adjustment accuracy | ±1ºC | ||
| Configuration | Pirani vacuum gauge | ||
| Internal dimension | 4 type: W450×D450×H450mm | ||
| 6 type: W600×D600×H600mm | |||
| Power source | Single phase AC220V | ||
The system has powerful communication and configuration editing functions, and can be connected to multiple devices via LAN or RS232/RS485 to form a laboratory monitoring and control network. in addition, internet remote monitoring and control may be implemented. Therefore, it is greatly convenient for users to perform system integration and automatic monitoring.
At the same time, the system is extremely flexible, in addition to the independent formation of the monitoring network, it can also achieve multi-system interconnection with the customer's laboratory MES, QMS ; The integration of the room system makes the test process more convenient and the data organization safer and more reliable.
Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.
Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."
ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.
ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
Secondly, our after-sales department will periodically follow up customers.
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base.
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.
){kind=link}