| Customization: | Available |
|---|---|
| After-sales Service: | After-Sales Service Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I , Purpose
This machine is suitable for testing plastic test piece VICAT/HDT . This machine adopts computer system control, high precision LVDT special
displacement sensor. The deformation value is automatically locked after reaching the standard temperature. Testing is simple and convenient. Test
temperature up to 300ºC, equipped with water cooling system, to achieve rapid cooling.
II,Machine features
1.Computer system control, simple operation, integrated control, automatic timing, real-time temperature display. Program automatic control.
2.The initial load weight of the frame is light, which meets the requirements of the new standard for the minimum load of flat samples
3.The sample frame, indenter and load rod are made of high- performance abrasive steel with high hardness and low coefficient of thermal expansion.
4.Deformation induction device: use special LVDT displacement sensor, resolution is 0.001mm
5.The load rod has an air guide ring design to provide vertical frictionless action
6.Built-in heat exchanger, water cooling can be carried out. Improve test efficiency.
7.The software automatically corrects the coefficient of thermal expansion and eliminates the system error of the machine.
8.Adopt high precision temperature controller and temperature sensing rod to form closed-loop temperature control system. Temperature multi-point linear correction calibration function.
9.The method of circulating stirring with multiple impellers ensures the uniform temperature of the test oil. At the same time, three groups of temperature sensing rods are used to test the deformation temperature beside the sample respectively.
10.Reach the standard deformation, automatically record the corresponding temperature value, and automatically shut down.
| Item | Details |
| Standard | GB/T1633, GB/T1634 |
| Test Mode | VICAT/HDT |
| Control Mode | Computer system operation |
| Sampling Frequency | 33HZ |
| Temperature Control Range | Room temperature - 300ºC |
| Precision of Temperature Control | ±0.1ºC |
| Temperature Accuracy | ≤±1ºC |
| Heating Rate | 50ºC/h, temperature rise of 5ºC±0.5ºC every 6min |
| 120ºC/h, temperature rise of 12ºC±1ºC every 6min | |
| Deformation Measurement | LVDT displacement sensor |
| Deformation Measurement Range | 0.001~4mm |
| Deformation Measurement Resolution | ±0.001mm |
| Deformation Measurement Accuracy | 0.1~1mm range ≤0.005mm |
| Thermal Deformation Sample Span | 64mm, 100mm other optional |
| Temperature Sensing | Measurement around the sample |
| Number of Test Stations | 3 or 6 groups optional |
| Heating Medium | Methyl silicone oil (below 200 CST, flash point above 300ºC, customer-provided) |
| Cooling Mode | Water cooling mode, improves test efficiency |
| Volume (W*D*H) | 1500mm × 840mm × 1710mm |
| Weight | About 355kg |
| Power Supply | AC220V 50HZ 25A |
| Customer Preparation | - Installation space, flat bearing level ground - Heat conduction oil: about 30L, flash point ≥300ºC, recommended 100# - Power requirements: AC(220±10)V, (50±0.5)Hz, single phase, protection ground, 32A, 2P circuit breaker (customer-provided) - Ground cable resistance: < 4 ohms - Water source: upper and lower water, water into tap water, drain to ground or sewer pipe, long water cooling system |
Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.
Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."
ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.
ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
Secondly, our after-sales department will periodically follow up customers.
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base.
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.
){kind=link}