Laboratory Equipment High and Low Temperature Humidity Chamber

• Customization: Available
• After-sales Service: After-Sales Service Available
• Power Supply: 380V ± 10% / 50Hz ± 1( 3p+N+G )
• Model NO.: CH Series
• Certification: ISO
• Warranty: 1 Year
• Temperature Range: -70c-+150ºC
• Temperature Fluctuation: ±0.5ºC
• Temperature Deviation: ±2ºC
• Temperature Uniformity: 2ºC
• Transport Package: Wooden Package
• Specification: 100-2000 L; or Customized(Interior capacity)
• Trademark: ATEC
• Origin: China
• HS Code: 8479899990

Product Description

Product Description

Safety & Protections
Power supply undervoltage, over-voltage, missing phase, phase sequence error protection; 3 kinds of overtemperature protection Heater short circuit protection; Compressor overpressure / overload protection; Humidifier fault protection; Blower Motor overload / overheat protection; Panel over-current protection, earth leakage protection.

Application
CH series high-low temperature(humidity) chambers are widely used in aviation, aerospace, electronics, shipbuilding, instrumentation and other industries to do accelerated damp heat test, alternating damp heat test and fixed-value damp heat test for electrical and electronic products, materials, components, equipment. It can also be used to do high-low temperature test in order to evaluate the performance of the test samples under the given environmental conditions.

Options
Logger, Special cable port, special shelf, water cooling etc.

Material
Exterior: Spay steel(1.5mm), white(with little gray) body, blue door.
Interior: SUS304 stainless steel(1.2mm), fully welded seam, vapor impermeable.
Heat insulation: Double insulation, thickness 125mm (Polyurethane foam board, without asbestos mineral fibers)
 

Product Parameters

Parameters for all models

High-Low Temperature(humidity)Chamber
Madel Number			CH100(TC)	CH160(TC)	CH250(TC)	CH340(TC)	CH600(TC)		CH1000(TC)	CH1600(TC)	CH2000(TC)
Interior capacity(L)			100L	160L	250L	340L	600L		1000L	1600L	2000L
Performance	Temperature Range		C:-70C-+150ºC(CH100ºC-60ºC~+150C);Empty:-40ºC ~ +150ºC;T:Only temperature,Empty:temperature and humidity
	Temperature Fluctuation		±0.5ºC
	Temperature Deviation		±2ºC
	Temperature Uniformity		2ºC
	Humidity Deviation		-3~+2%R.H.(>75%R.H.),±5%R.H.(≤75%R.H.)
	Heating Rate(average value)		2ºC/min	3ºC/min						2.5ºC/min	2.5ºC/min
	Cooling Rate(average value		1.5ºC/min	2ºC/min						1.8ºC/min	1.5ºC/min
	Remark		Above measured at ambient 20±2ºC,no load,heating/cooling rate moasured within+80/-30C and +85/-55ºC
Interior Size (mm)		D	400	500	535	700	750		1000	1000	1100
		W	500	560	600	650	850		1000	1000	1000
		H	500	600	750	750	900		1000	1600	1800
Exterior Size (mm)		D	1250	1100	1510	1680	1750		2000	2100	2300
		W	750	810	850	900	1100		1250	1250	1250
		H	1650	1760	1580	1650	1880		1980	2000	2200
Casters			4 casters(exterior size above not include casters,casters increased 50-100mm)
Inspection window			450×450 with heating device to prevent condensation and frost
Cable Port			φ80×1,on the right side of chamber(facing door)
Stainless Steel Shelf(2pcs)			Load bearing 20kg/each				Load bearing35kg/each
Internal Lighting			35W/12V							2*35W/12V
Sub-Controller	Energy saving method		Independent PID regulation of cooling and heating(i.e.heating no refrigeration,refrigeration no heating,saving 30% than BTC)
	Heating		Electrical heating(3 kinds of overtemperature protection)
	Humidification		Steam humidification(water consumption 0-500ml/day)
	Refrigerating		Imported brand compressor (TECUMSEH/COPELAND/BITZER)
	Refrigerant		Environmentally friendly refrigerants R404A:CH100/CH160/CH250/CH340/CH600/CH1000 R404A+R23:other
	Condenser		Air-cooled(water-cooled optional,water temperature range:10~30ºC,pressure range:0.2 ~0.5Mpa)
Controller	Controller		7'Color touch screen,resolution:800x480,on the top of window
	Control Mode		Program and fixed value
	Program capacity		100×200,cycle,skip,maintain,link
	Sensor		PT100
	Communication		RS485 or LAN interface,USB interface as standard configuration,with host software
	Curve function		auto recorded by touch screen
Power supply			380V ± 10% / 50HZ ± 1( 3P+N+G )
Rated current(A)(-/-C)			12/15	13/16	15/20	15/20	22/28		25/32	26/35	29/38
Installed power(kw)(-/-C)			4.8/5.5	5.2/7	6.3/8.5	6.3/8.5	10/13		13/17	15/19	16/20
Weight (kg)w(-/-C)			210/250	280/330	330/380	400/450	620/680		900/960	1300/1400	1600/1700

Company Profile

Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.

Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."

ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.

ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.

Workshop

Cooperation Cases

Other Products

Certifications

FAQ

1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
 
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
 
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
 Secondly, our after-sales department will periodically follow up customers.
 
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
 
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base. 
 
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.