Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

Product Details
Customization: Available
After-sales Service: After-Sales Service Available
Warranty: 1 Year
Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
5
Year of Establishment
2020-08-11
Find Similar Products
  • Overview
  • Product Parameters
  • Product Description
  • Certifications
  • Company Profile
  • Other Products
  • Cooperation Cases
  • Packaging & Shipping
Overview

Basic Info.

Model NO.
SS-8900-10
Capacity Selection
100kN
Force Accuracy
≤±0.5%
Test Speed Range
0.001 ~ 500mm/Min
Speed Accuracy
Within ±0.5% of The Indicated Value
Transport Package
Wood Case
Specification
1200x770x2300mm
Trademark
SARTEC
Origin
China
HS Code
8419399090

Product Description

SS-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware
    Product Parameters
     
    Item Details
    Machine Form Gantry double column floor type
    Load Element Imported high precision 0.5 level force sensor
    Capacity Selection 100KN
    Force Accuracy ≤±0.5%
    Force Magnification Automatic magnification without segment
    Power System Imported AC servo system, servo motor, and servo driver
    Transmission Mode No clearance ball screw, precision transmission
    Active Bearing High carbon ball bearing
    Test Speed Range 0.001 ~ 500mm/min
    Speed Accuracy Within ±0.5% of the indicated value
    Displacement Measurement Accuracy ≤ ±0.5% of the indicated value
    Beam - Table Distance 1250mm (customizable)
    Test Width 580mm
    Dust-Proof Device Anti-stack dust cover to protect ball screw, ensuring longevity and accuracy
    Guide Rod Imported, treated with high frequency and hard chrome plating (HRC60+)
    Body Surface Treatment U.S. DuPont powder, electrostatic high-temperature paint process, cured at 200ºC
    Test Curve Arbitrarily set vertical and horizontal coordinate units (stress-time, strain-time, etc.)
    Display System Computer system
    Protection Devices -Mechanical protection
    -Emergency stop switch brake protection
    -Break point stop protection
    -Software overload limit protection
    Volume (W × D × H) 1200x770x2300mm
    Power Supply 1φAC220V, 50HZ, 3.5KW
    Weight About 1100kg
    Customer Preparation - Installation space, flat level ground
    - Power requirements: AC(220±10)V, (50±0.5)Hz, 25A air switch
    - Ground protection: resistance < 4Ω
    Product Description

    I Application scope:

    This testing machine is widely used in metal, plastic, rubber, textiles, hardware, cable and other kinds of materials, test its tensile, tearing, peeling, compression, bending and other materials research and development, inspection and testing, the function of its full, widely used in aerospace, auto parts, scientific research institutes, quality inspection institutions and other related industries.

    II Machine features:

    1.Advanced technology: CNC digital control parts processing, streamline modeling, metal surface nickel plating, phosphating, DuPont powder high temperature paint, constant temperature curing and other advanced process processing, the machine modeling elegant, exquisite, to reflect the noble texture.

    2.Accurate measurement data: the United States interface high-precision force sensor, explosion-proof design, tension and pressure on both sides of the force.

    3.Maintenance-free power system: adopts Japanese Panasonic AC servo motor system, the original supporting servo driver, can achieve fixed speed, fixed stress, fixed strain three closed-loop control. With imported synchronous belt, to provide high speed and low noise transmission combination.

    4.Optimized transmission system: gantry type structure, using imported no clearance, no wear precision ball screw. Can eliminate noise and machine resonance to ensure transverse arm displacement levelness and specimen stress uniformity. The prestressed guide rod is installed on both sides of the ball screw to ensure the stiffness of the whole machine.

    5.Standard parts design: jig joint unified standard connector, size standardized design, quick and convenient replacement of different jig. Multiple sensors or trapezoidal slots can be selected for the corresponding expansion test.

    6.Intelligent DSP processing system: SARTEC independently developed tension machine control system, real-time transmission with computer, computer intelligent control.

    1. The main controller adopts the advanced 32-bit processor, the calculation speed is faster, the control precision is higher.
    2. The data acquisition core device adopts the ultra-high precision 24-bit AD imported from the United States, the sampling rate can reach 2000 times/second, can capture the instantaneous change of force process, the whole non-classification resolution up to 500000 degrees. And the original multi-point calibration technology is used to further improve the accuracy, the force measurement accuracy is better thanthe national 0.5 level (the highest level) standards.
    3. Displacement encoder counting uses 4 times frequency technology, which improves displacement resolution 4 times.
    4. Advanced speed, displacement, force three closed-loop technology, can achieve accurate arbitrary waveform control.
    5. Rich interface expansion capability: up to 4 24-bit analog input, 3 16-bit analog output, 3 pulse output, 3 AB phase photoelectric encoder input, 9 switching input, 8 switching output.
    6. All input-output interfaces adopt high-speed photoelectric isolation technology, with strong anti-interference ability.

    7.Humanized design: intelligent remote control, can be fixed next to the machine, fast control, to achieve a variety of jig different positioning of the quick adjustment.

    8.Tension machine special intelligent software, can run stably in WINDOWS 7 and other windows operating systems. It can measure the mechanical properties of various materials in the state of stretching, compression, bending, shearing, tearing, peeling, puncture and so on.
    1. Suitable for mainstream Windows operating system, friendly interface, simple and convenient operation.
    2. Using multithreading parallel processing technology, real-time display of force-displacement, force-time, displacement-time, stress-strain and other curves during the test process, you can switch to any curve screen, and you can view the user Settings.
    3. Flexible and powerful test method custom way, with fixed speed, positioning shift, fixed force, fixed stress, fixed strain, and other control modes. It can set automatic return, automatic judgment of fracture, automatic return to zero and other functions.
    4. Powerful data analysis statistics and curve graphic analysis AIDS, with zoom, zoom, translation, cross cursor, take points and other functions. Multiple historical test data can be called into the graphic display at the same time for comparative analysis. Up to 7 interval Settings, 30 manual point fetching, 60 automatic point fetching functions. With maximum, minimum, average, to high and low mean, median, standard deviation, overall standard deviation, CPK value and other statistical functions.
    5. Fully open test results editing method, users can get any desired test results. The most powerful force, breaking force, peeling force, tensile strength, shear strength, tearing strength, maximum deformation, yield force, elongation, elastic modulus, ring stiffness, non-proportional elongation, interval minimum force, interval average force, fixed elongation, fixed force elongation and so on up to 400 calculation results are calculated automatically by the computer, for the user to choose to call.
    6. Powerful unit system, such as force value unit gf, kgf, N, kN, tf, lbf, etc. for choice, but also can expand any variety of units.
    7. Has the test method storage, call and other functions.
    8. With the test data storage, display, print, remitting and other functions.
    9. Multi-language switch: Simplified Chinese, traditional Chinese, English and other languages can be selected.
    Feel free to click here to contact us for more information!
     
    Certifications

    Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

    Company Profile

    Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, HardwareSs-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, HardwareSs-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, HardwareSs-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

    Other Products

    Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

    Cooperation Cases

    Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

    Packaging & Shipping
    Ss-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, HardwareSs-8900-10 Electronic Universal Material Testing Machine (10T) for Metal, Plastic, Rubber, Textiles, Hardware

    Send your message to this supplier

    *From:
    *To:
    *Message:

    Enter between 20 to 4,000 characters.

    This is not what you are looking for? Post a Sourcing Request Now
    Contact Supplier