| Customization: | Available |
|---|---|
| After-sales Service: | After-Sales Service Available |
| Power Supply: | 380V +/- 10% / 50Hz +/- 1( 3p+N+G ) |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Safety & Protections
Power supply undervoltage, over-voltage, missing phase, phase sequence error protection; 3 kinds of overtemperature protection Heater short circuit protection; Compressor overpressure / overload protection; Humidifier fault protection; Blower Motor overload / overheat protection; Panel over-current protection, earth leakage protection.
| High - Low Temperature ( Humidity ) Chamber | |||||||||||
| Madel Number | CH100(TC) | CH160(TC) | CH250(TC) | CH340(TC) | CH600(TC) | CH1000(TC) | CH1600(TC) | CH2000(TC) | |||
| Interior capacity(L) | 100L | 160L | 250L | 340L | 600L | 1000L | 1600L | 2000L | |||
| Performance | Temperature Range | C:-70C-+150ºC(CH100ºC-60ºC~+150C);Empty:-40ºC ~ +150ºC;T:Only temperature,Empty:temperature and humidity | |||||||||
| Temperature Fluctuation | ±0.5ºC | ||||||||||
| Temperature Deviation | ±2ºC | ||||||||||
| Temperature Uniformity | 2ºC | ||||||||||
| Humidity Deviation | -3~+2%R.H.(>75%R.H.),±5%R.H.(≤75%R.H.) | ||||||||||
| Heating Rate(average value) | 2ºC/min | 3ºC/min | 2.5ºC/min | 2.5ºC/min | |||||||
| Cooling Rate(average value | 1.5ºC/min | 2ºC/min | 1.8ºC/min | 1.5ºC/min | |||||||
| Remark | Above measured at ambient 20±2ºC,no load,heating/cooling rate moasured within+80/-30C and +85/-55ºC | ||||||||||
| Interior Size (mm) |
D | 400 | 500 | 535 | 700 | 750 | 1000 | 1000 | 1100 | ||
| W | 500 | 560 | 600 | 650 | 850 | 1000 | 1000 | 1000 | |||
| H | 500 | 600 | 750 | 750 | 900 | 1000 | 1600 | 1800 | |||
| Exterior Size (mm) |
D | 1250 | 1100 | 1510 | 1680 | 1750 | 2000 | 2100 | 2300 | ||
| W | 750 | 810 | 850 | 900 | 1100 | 1250 | 1250 | 1250 | |||
| H | 1650 | 1760 | 1580 | 1650 | 1880 | 1980 | 2000 | 2200 | |||
| Casters | 4 casters(exterior size above not include casters,casters increased 50-100mm) | ||||||||||
| Inspection window | 450×450 with heating device to prevent condensation and frost | ||||||||||
| Cable Port | φ80×1,on the right side of chamber(facing door) | ||||||||||
| Stainless Steel Shelf(2pcs) | Load bearing 20kg/each | Load bearing35kg/each | |||||||||
| Internal Lighting | 35W/12V | 2*35W/12V | |||||||||
| Sub-Controller | Energy saving method | Independent PID regulation of cooling and heating(i.e.heating no refrigeration,refrigeration no heating,saving 30% than BTC) | |||||||||
| Heating | Electrical heating(3 kinds of overtemperature protection) | ||||||||||
| Humidification | Steam humidification(water consumption 0-500ml/day) | ||||||||||
| Refrigerating | Imported brand compressor (TECUMSEH/COPELAND/BITZER) | ||||||||||
| Refrigerant | Environmentally friendly refrigerants R404A:CH100/CH160/CH250/CH340/CH600/CH1000 R404A+R23:other | ||||||||||
| Condenser | Air-cooled(water-cooled optional,water temperature range:10~30ºC,pressure range:0.2 ~0.5Mpa) | ||||||||||
| Controller | Controller | 7'Color touch screen,resolution:800x480,on the top of window | |||||||||
| Control Mode | Program and fixed value | ||||||||||
| Program capacity | 100×200,cycle,skip,maintain,link | ||||||||||
| Sensor | PT100 | ||||||||||
| Communication | RS485 or LAN interface,USB interface as standard configuration,with host software | ||||||||||
| Curve function | auto recorded by touch screen | ||||||||||
| Power supply | 380V±10%/50HZ±1(3P+N+G) | ||||||||||
| Rated current(A)(-/-C) | 12/15 | 13/16 | 15/20 | 15/20 | 22/28 | 25/32 | 26/35 | 29/38 | |||
| Installed power(kw)(-/-C) | 4.8/5.5 | 5.2/7 | 6.3/8.5 | 6.3/8.5 | 10/13 | 13/17 | 15/19 | 16/20 | |||
| Weight (kg)w(-/-C) | 210/250 | 280/330 | 330/380 | 400/450 | 620/680 | 900/960 | 1300/1400 | 1600/1700 | |||
Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.
Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."
ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.
ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
Comprehensive Environmental Testing Solutions
We provide a full range of environmental and reliability testing equipment to simulate extreme conditions and ensure product durability. Our solutions include:
High and Low Temperature Environmental Chambers
Rapid Temperature Change Chambers
Thermal Shock Test Chambers
High and Low Pressure Chambers
Walk-in Environmental Test Chambers
Vibration Test Chambers
Rain Test Chambers
Sand and Dust Test Chambers
Environmental Test Ovens
Fuel Cell Test Equipment
Electrolyzer Testing Systems
Various Material Testing Equipment
Our advanced testing solutions help industries ensure compliance with international standards, enabling precise performance evaluation under harsh conditions. Contact us today to find the ideal testing solution for your needs!
1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
Secondly, our after-sales department will periodically follow up customers.
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base.
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.
){kind=link}