Low Pressure Environmental Test Chamber for High Altitude Simulation

Product Details
Customization: Available
After-sales Service: After-Sales Service Available
Power Supply: 380V±10%/50Hz±1(3p+N+G)
Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
5
Year of Establishment
2020-08-11
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
  • Low Pressure Environmental Test Chamber for High Altitude Simulation
Find Similar Products
  • Overview
  • Product Description
  • Product Parameters
  • Company Profile
  • Workshop
  • Cooperation Cases
  • Other Products
  • Certifications
  • FAQ
Overview

Basic Info.

Model NO.
UD Series
Warranty
1 Year
Temperature Fluctuation
± 0.5 ºC
Temperature Deviation
± 2 ºC
Temperature Uniformity
2 ºC
Pressure Instauration Time
≤10kpa/Min
Transport Package
Wood Case
Specification
250L / 500L / 1000L /2000L / Customized
Trademark
ATEC
Origin
China

Product Description

High&Low Temperature and Vacuum Chamber UD Series(with Humidity)
Product Description

Safety & Protections

Power supply under-voltage, over voltage, missing phase, phase sequence error protection; 3 kinds of overtemperature protection Heater short circuit protection; Compressor overpressure/ overload/ protection: Humidifier fault protection: Blower Motor overload/overheat protection; Panel over current protection, earth leakage protection: Vacuum pump overload protection: compressed air inadequate pressure protection.

Application
Mainly used in aviation, aerospace, information, electronics and other fields to determine the instrumentation, electronic products, materials, components, equipment, etc. under the single or simultaneous condition of low pressure, high temperature, low temperature for environmental adaptability and reliability test or measured technical data of samples.

Options
1. Special cable port;
2. Electric interlock,terminals;
3. Special shelf;


Material
Exterior: Spay steel(1.5mm), white(with little gray) body, blue door.
Interior: SUS304 stainless steel(5mm), fully welded seam, vapor impermeable.
Heat insulation: Double insulation, thickness 200mm (Polyurethane foam board, without asbestos mineral fibers)

Feel free to click here to contact us for more information!
Product Parameters
Parameters for Other models 
High&Low Temperature and Vacuum Chamber
Model   Number TD250(C) TD500(C) TD1000(C)
Interior capacity(L) 250L 500L 1000L
Performance Temperature Range Suffix is empty:-40ºC~+150 ºC  C: -70ºC~+150ºC
Temperature Fludluation ±0.5ºC
Temperature Unifommity 2ºC
Temperature Deviation ±2ºC
Heating Rate(average value) 2ºC/min 2ºC/min 2ºC/min
Cooling Rate(average value) 1ºC/min 1ºC/min 1ºC/min
Remark Above measured at ambient pressure, no load;
heating/cooling rate measured at temperature range within +80/-30ºC and +85/-55ºC
Pressure Range Ambient pressure~0.5kPa
Vacuum Accuracy ±2KPa(≥40kPa),±5%(2Kpa~40KPa),±0.1KPa(≤2KPa)
Vacuum Speed Ambient pressure~1kPa, 30min approx
Pressure Instauration Time ≤10kPa/min
Basket Interior
Size (mm)
D 550 700 1000
W 600 800 1000
H 750 900 1000
Exterior Size
(mm)
D 2000 2400 2650
W 1700 1200 1400
H 1750 1900 2000
Inspection Window 300*300with heating device to prevent condensation and frost
Cable Port φ100*1, on the right side of chamber(facing door)
Stainless Steel Shelf(2pcs) Load bearing 20kg/each Load bearing 35kg/each
Sub-Controller Energy saving method Independent PID regulation of cooling and heating(i.e. heating no refrigeration, refrigeration no heating, saving 30% than BTC)
Heating Electrical heating(3 kinds of overtemperature protection)
Refrigerating Imported brand compressor (BITZER)
Refrigerant Environmentally friendly refrigerants: R404A+R23
Condenser water-cooled(water termperature:10~30ºC,water pressure 0.2~0.5MPa)
Controller Controller 7' color touch screen, resolution 800×480
Control Mode Program and fixed value
Program capacity 30×50, cycle, skip, maintain, link
Sensor PT100+Pressure Sensor
Communication RS485/RS232 interface, USB interface is standard configuration, with host software
Curve function auto recorded by touch screen
Air Source Compressed dry air 0.5~0.8MPa
Power supply 380V±10%50HZ±1(3P+N+G)
Installed power(kw)(/C) 14/18 19/25 28/36
Weight (kg) 1100 2100 3200
Company Profile

Low Pressure Environmental Test Chamber for High Altitude Simulation

Founded in 2003, Chongqing ATEC Technology Co., Ltd. (hereinafter referred to as ATEC) is a national-level innovation-oriented hi-tech enterprise specially committed to the research on testing the reliability of the latest global techniques and the equipment for the simulation of climate and environment. ATEC is the first domestic listed company specialized in climatic & environmental testing equipment.

Since 2006, ATEC has established a joint venture with Italian Angelantoni Group to develop and manufacture the world's most advanced environment testing equipment and undertaken the reliable environment test engineering. In October 2013, ATEC repurchased all the shares of Italian Angelantoni, vigorously took in the world's advanced environmental simulation technology and stringent quality control concept, and had them optimized and innovated. This enabled ATEC to become an innovation-oriented well-known enterprise with completely proprietary intellectual property rights. In addition to that, ATEC's product technical strength and technological level also "take the leading position in China and become internationally advanced."

ATEC not only researches and develops, designs, and manufactures the whole series of climatic environmental testing equipment but also provides solutions for various kinds of climatic and environmental simulation testing engineering. The main products include high-/low-temperature humidity chamber, temperature shock chamber, low-pressure chamber, chamber combined with temperature/humidity/vibration, single-shaft and multi-shaft rotary temperature chamber, rainfall/dust/light/salt spray environment simulation system, vehicle climate/environment simulation and detection system, multi-factor environment simulation system, and various kinds of non-standard testing systems, etc.

ATEC was honored as "national high-tech enterprise" and provided with the innovation funds from the State Scientific and Technological Commission. It has several technical patents, passes ISO9001:2008 quality management system certification, and can produce environment testing equipment that conforms to various kinds of international standards, such as MIL, IEC, and DIN. The products are widely applied in national key laboratories and large-scaled third-party testing laboratories involving aviation, aerospace, armament, vessel, automobile, intelligent manufacturing, new energy, measurement electronics, railway, health care, academic institutions, and many other important fields of the national economy.
Low Pressure Environmental Test Chamber for High Altitude Simulation

Workshop

Low Pressure Environmental Test Chamber for High Altitude Simulation

Cooperation Cases

Low Pressure Environmental Test Chamber for High Altitude Simulation

Other Products

Low Pressure Environmental Test Chamber for High Altitude Simulation

Low Pressure Environmental Test Chamber for High Altitude Simulation
Certifications

Low Pressure Environmental Test Chamber for High Altitude Simulation

Low Pressure Environmental Test Chamber for High Altitude SimulationLow Pressure Environmental Test Chamber for High Altitude Simulation
FAQ

1.Do you accept OEM (Original Equipment Manufacturer) service?
Yes we accept any OEM service since we are a professional manufacturer for medical equipment with about more than 10 years of OEM experiences.
 
2.What kind of guarantee do you offer?
We provide 1 year warranty for all our items.
 
3.How to deal with the faulty?
First, our products are produced in strict quality control system, but if any faulty, we'll send new spare parts for free in 1 warranty year.
 Secondly, our after-sales department will periodically follow up customers.
 
4.What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, you can also contact us with more technological support.
 
5.Why should you buy from us?
ATEC group, founded in 2003 and been through high and stable development for 20 years, who is now with revenues of one hundred million, 2000 employees in China and abroad offices, 22.4 acres land industry parks and 20000 square meters production base. 
 
6.When can I get the price?
We usually quote as soon as we get your inquiry. If you need urgent reply, please tell us your email or Wechat account, we will contact you ASAP.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier