Jh (A) P Series Hydrogen (& Air) Pre Cooling Unit

• Customization: Available
• After-sales Service: After-Sales Service Available
• Warranty: 1 Year
• Model NO.: JH(A)P Series
• Test Region: Test Auxiliaries
• Application: Hydrogen Fuel Cell Systems
• Customized: Customized
• Temperature Range: -40ºC~80ºC
• Usage: Provide Pre-Cooling/Pre-Heating of Hydrogen & Air
• Applications: Hydrogen Fuel Cell Power Stacks From 1kw to 300kw
• Advantages: Precise Regulation of Hydrogen and Air Temperature
• Transport Package: Wood Case
• Specification: 1000-2200kg (Depends on the model)
• Trademark: Jupiter
• Origin: China

Product Description

 

Product Description

JHP Series Hydrogen Pre Cooling Unit
Introduction:
The hydrogen pre cooling device is an advanced equipment specifically designed to provide relevant testing for hydrogen fuel cell systems. Its main function is to achieve pre cooling or preheating of hydrogen, providing the required temperature of hydrogen for hydrogen fuel cell systems. Jupiter can provide the hydrogen temperature control function required for climate and environmental testing of hydrogen fuel cell systems with power ranging from 1KW to 300KW and higher, ensuring that the gas temperature is consistent with environmental conditions during the testing process, thereby ensuring the accuracy and reliability of the test.

The core advantage of the oxygen temperature control device is that it can accurately control the hydrogen temperature required by the fuel cell system to the level consistent with climate and environmental tests, avoiding the problem of test data distortion caused by inconsistent hydrogen supply temperature and environmental temperature.

Key Units:
Refrigeration system: responsible for reducing the temperature of hydrogen gas to ensure it achieves the required pre cooling effect.
Thermal oil heating system: used to precisely control the temperature of hydrogen gas and ensure its consistency with the test environment.
Control system: intelligently control and monitor the entire device to ensure the stability and safety of the testing process

JHAP Series Hydrogen & Air Pre Cooling Unit
Introduction
In the field of hydrogen energy detection, the hydrogen air pre cooling device is a key equipment used in the testing process of hydrogen fuel cell stacks. Its main function is to provide pre cooling or preheating of hydrogen and air for fuel cell stacks, ensuring the detection of performance indicators of fuel cell stacks under different environmental conditions.

The JHAP pre cooling device can be applied to hydrogen fuel cell stacks of 1KW to 300KW and higher power, providing precise climate and environmental testing support. Its core advantage lies in its ability to precisely adjust the temperature of hydrogen and air to maintain consistency with the ambient temperature of the fuel cell stack, thereby avoiding the problem of affecting the test results due to gas temperature distortion.

Note:
Requirements for hydrogen and air supply:

• The dry bulb temperature of hydrogen and air should be ensured to be below 30 ºC;
• The dew point temperature of hydrogen and air should be ensured to be below -55 ºC;
• Providing low dew point hydrogen and air is the key to ensuring stable system operation, which can effectively prevent gas from entering the plate heat exchanger and damaging it due to condensation and icing.

Product Parameters

JHP Series Hydrogen Pre Cooling Unit
Model	JHP2-T	JHP3-T	JHP4-T	JHP5-T	JHP6-T	JHP7-T	JHP8-T
Hydrogen flow rate	2000NLPM	3000NLPM	4000NLPM	5000NLPM	6000NLPM	7000NLPM	8000NLPM
Temperature range	-40ºC~80ºC
Dimensions (D*W*H)	Nearly 1800mm*1000mm*2600mm		Nearly 2250mm*1250mm*2600mm		Nearly 2400mm*1250mm*2600mm
Installed power	17Kw	25Kw	33Kw	38Kw	45Kw	56Kw
Maximum operating current	23A	34A	48A	50A	60A	76A
Cooling water flow rate	4m³/h	5m³/h	6m³/h	7m³/h	9m³/h	12m³/h
Interface type	External wire G1	External wire G2 1/2				External wire G2
Weight	1000Kg	11000Kg	1300Kg	1500Kg		1800Kg

JHAP Series Hydrogen & Air Pre Cooling Unit
Model	JHAP26-T	JHAP39-T	JHAP412-T	JHAP515-T	JHAP618-T	JHAP721-T	JHAP824-T
Hydrogen flow rate	2000NLPM	3000NLPM	4000NLPM	5000NLPM	6000NLPM	7000NLPM	8000NLPM
Air flow rate	6000NLPM	9000NLPM	12000NLPM	15000NLPM	18000NLPM	21000NLPM	24000NLPM
Temperature range	-40ºC~80ºC
Dimensions (D*W*H)	Nearly 2250mm*1250mm*2650mm		Nearly 2400mm*1400mm*2800mm		Nearly 2700mm*1700mm*3000mm
Installed power	45Kw	55Kw	70Kw	85Kw	98Kw	110Kw	138Kw
Maximum operating current	60A	71A	92A	110A	130A	148A	186A
Cooling water flow rate	12m³/h	14m³/h	18m³/h	21m³/h	25m³/h	28m³/h	36m³/h
Interface type	External wire G1 1/2	External wire G2	External wire G2 1/2			External wire G2	External wire G2 1/2
Weight	1500Kg		1800Kg		2200Kg

Centralized control

 

Certifications

Company Profile

Other Products

Cooperation Cases

Packaging & Shipping